What different kinds of diamond settings does BAUNAT offer?
For engagement rings, different types of settings are possible. You can find below the most used settings of BAUNAT:
1. Prong setting
The solitaire prong setting only has one single diamond that figures as the centerpiece of the ring. The claws enable the center diamond to be positioned in such a way that it catches the most light. BAUNAT diamond rings either have four or six claws. A setting with 4 claws makes the diamond appear more square-like while one with 6 claws makes it appear more round-like.
The name ‘prong setting’ refers to the so-called ‘claws’. The prong setting is most commonly used for engagement rings worldwide. This setting is also suitable for almost all shapes of diamonds.
The claws can be very thin or wider, and can be finished in a round, square, or pointed shape. This depends on the design of the jewel and the style of each goldsmith.
The advantages of the prong setting
- The diamond catches the most light
- The prongs are small, therefore a larger part of the diamond is visible
- The diamond in the ring is easy to clean
- Claws in white gold or platinum are barely visible on the white diamond
2. Pavé setting
The term Pavé setting comes from the French which means ‘paved’. The individual small diamonds at a pavé diamond ring remember of tiny paving stones, therefore the name. In a ring with pavé setting, small diamonds are placed next to each other, and fixed by small prongs that look like beads. These claws are worked out directly from the gathering point of the metal. This way, hardly any metal can be seen.
The advantages of Pavé setting
- The many small prongs make the diamonds sparkle, although only small diamonds are used
- The price of many small stones is considerably lower than with one big diamond
3. Channel setting
Channel setting is a method where diamonds are suspended between two rails of metal, called channels. The diamond is put in place, and the metal on top is pushed down, tightening the diamond.
This way, a continuous line of diamonds is created.
Channel settings, together with pave settings, are commonly used for diamond alliance rings and wedding bands. At BAUNAT, most of our designs with channel settings have princess diamonds, but also round diamonds or baguette diamonds can be used (tailor-made).
The advantages of the channel setting
- Because the diamonds are placed next to each other, it gives the impression of continuous brilliance
- The surface is very smooth
- These rings can be combined with other ring designs easily
4. Bezel setting
The bezel setting is a traditional, very labor-intensive goldsmith technique. The metal surrounds the diamonds on its sides and forms a frame around the stone. There is another precious metal strip (frame), which serves as a support for the diamond on the inner socket. The bezel is particularly well suited for round cut (brilliant) or oval diamonds.
The advantages of the bezel setting
- Because of the border of the precious metal, the diamond is protected against damage
- The bezel is open at the bottom, creating a higher radiance and more fire
- Because of the metal surrounding the diamond, it will appear larger than it actually is
- Because of the fact that there are no prongs, this setting will not get stuck behind any clothing
These are the most common setting methods. Of course, BAUNAT can also offer other types of settings in her tailor-made jewellery. Please contact email@example.com in case you would have any interest in a tailor-made jewel with a different diamond setting.